Downer EDI Mining [a division of Downer EDI Limited] has engaged Dowdens Pumping & Water Treatment [Brisbane] to design, manufacture, install and commission a Heavy Vehicle Wash Bay and associated plant treatment equipment at the Meandu Coal Mine located in Tarong, South East Queensland.

Since January 2013 Downer EDI Mining has been providing mining services at Meandu Mine as part of their long-term rolling contract with TEC Coal Pty Ltd, a wholly owned subsidiary of Stanwell Corporation Limited. Downer provides a total mine service to TEC Coal, including mine management, planning, drilling, overburden removal (including dragline and truck-and-shovel operations), coal mining, coal processing, rehabilitation, and maintenance of mobile and fixed plant.

Downer EDI's Heavy Vehicle Wash Bay project tender was won primarily due to Dowdens ability to expertly design / manufacture / install and commission specialised equipment, built in-house & onsite to meet our specific client's unique requirements. With a history of successful installations over the past 15 years within the Queensland Mining Sector, Dowdens is Queensland's premier pumping & water treatment organisation.

Downer's project brief to Dowdens Brisbane was for the design / manufacture / installation and commissioning of a Heavy Vehicle Wash Bay capable of processing a minimum of 5 vehicles per day, with each vehicle taking approximately 1 hour to wash. Meandu Mine required this new Heavy Vehicle Wash Bay to be constructed after the mine had recently purchased a fleet of new generation trucks (KOMATSU 830E Trucks) which are considerably larger in size compared to their existing fleet.

To ensure Meandu Mine continued to meet their Environmental Discharge requirements Dowdens designed and incorporated 4x Settling Pits & 3x Oily Water Separators into the construction of the Heavy Vehicle Wash Bay. In Queensland it is a legal requirement for mine sites to treat (separate) any sludge or oil from any waste water coming from a Heavy Vehicle Wash Bay.

Pictured below you can see the 4x large Settling Pits (empty) that are used to catch / store (via gravity feed) waste water from the Wash Pad area. The waste water generally contains some grease, oil, coal fine and soil (mud). The coal fine, mud and other solid particles washed off the trucks is allowed to settle to the bottom of the Settling Pits - the pits are then intermittently emptied by a Bobcat excavator.

The waste water (still containing grease and oil) is pumped from the Settling Pits via progressive cavity pumps into 3 individual 'Oily Water Separators' to remove the remaining contaminants. Once the waste water has been through this treatment stage it is pumped back into Meandu Mine's network of onsite holding dams to be used in other site extraction and processing applications.

Dowdens design philosophy for this project was: Cost Effectiveness - Current Best Practice - Ease of Installation - Simple Plant Operation - Plant Reliability & Reduced Maintenance.

Key Project System Components are listed below (click for component specs):

• 3x 47kL Poly Tanks for onsite Raw Water storage
• 1x Southern Cross 100x65-250 Cannon Pump
• 1x Grundfos 3kW Hose Reel Pump
• 8x 65mm Orion Sentinel Water Cannons
• 6x Heavy Duty Hose Reels
• 2x Foaming Units
• 1x 13.5kL Detergent Storage Poly Tank
• 1x 1kL Dilution Poly Tank

• 1x Grundfos 0.55kW Detergent Transfer Pump
• 4x Grundfos 7.5kW & Tsurumi 3kW Submersible Sump Pumps
• 2x Oily Water Seperators, Associated Pumps, Instrumentation & Control Board
• 1x Oily Water Hydrocyclone Seperator with Netzsch iFD-Stator® 2.0 Pump, Instrumentation & Control Board
• 1x Skimmer Pump
• 2x Control Panels
• Custom Built Associated Galvanised Pipework

Dowdens Pumping & Water Treatment's Rockhampton branch working closely with Dowdens Pumping - Mackay's Industrial & Fabrication Workshops have successfully designed, manufactured and commissioned a Customised Dewatering Pump System for YANCOAL Australia. YANCOAL own and operate the YARRABEE Coal Mine & Boonal Joint Venture Coal Load Out Facility that is located 40 kilometres north-east of the township of Blackwater, QLD in Central Queensland's Bowen Basin. The Boonal Joint Venture is a coal load out facility located on the Capricorn Highway in Central Queensland, Australia. Coal from both the Yarrabee Coal Mine and Jellinbah Coal Mine are transported via rail link to the Port of Gladstone from the Boonal coal load out facility.

After initial site visits Dowdens Pumping - Rockhampton were able to measure the height and distance required for the dewatering pump system, as well as clearly establish pipe sizes and required flow rates to adequately meet the clients onsite dewatering requirements. This led to the in-house design of the unit by Dowdens Pumping - Mackay's Engineering Department. Once the proposal had been accepted by the client CAD drawings were immediately created and passed onto the Dowdens Industrial Fabrication Workshop.

Boonal Joint Venture's Customised Dewatering Pump System Supply Scope:

• The Yanmar diesel engine recommended by Dowdens Pumping - Rockhampton ensured long term problem free operation
• All fabrication, assembly and performance testing was conducted by Dowdens Pumping & Water Treatment in-house & onsite guaranteeing product quality

As Dowdens Pumping are an authorised FLOWSERVE Pumps Distributor, we were able to quickly and easily size and source a FLOWSERVE Hydro Titan Pump. The Hydro Titan 100x65-250 Pump has a capable duty of 14 l/sec (@ 50m total head) and perfectly matched the clients site requirements. From here Dowdens Industrial Fabrication Workshop welded the skid base together which was then bunded and fully hot dip galvanised. This innovative system utilised a universal coupling, installed between the pump and motor to reduce the chance of miss alignment occurring between the pump and engine.

Dowdens Industrial Fabrication Workshop then proceeded to assemble and mount the 125l diesel fuel tank, Yanmar 3TNV84TEPP-PE 3-Cylinder Diesel Engine, Hydro Titan 100x65-250 Pump and install the universal coupling. Dowdens Electricians then connected the battery and solar array charger module to the canopy [pictured below], whilst mounting the Yanmar 'Engine Protection Unit'. The engine was then taken outside and tested. Once all this was completed it was transported to site where final commissioning was successfully completed.

The complete Boonal Joint Venture's Customised Dewatering Pump System was designed, installed and commissioned by Dowdens Pumping on time and within budget. Dowdens Pumping & Water Treatment's Rockhampton branches design philosophy for this project was: Cost Effectiveness - Innovation - Ease of Installation - Simple & Effective Pump Operation - Engine Longevity - System Reliability & Reduced Ongoing Maintenance.

Boonal Joint Venture's Customised Dewatering Pump System - Key Components:

• Hydro Titan 100x65-250 Pump with Universal Coupling
• Yanmar 3TNV84TEPP-PE 3-Cylinder Diesel Engine
• Mine Site Specification Compliance achieved

• Custom hot dipped galvanized pump base fitted with bunding to house diesel fuel tank
• Custom in-house design undertaken by Dowdens Project Engineering Department
• Custom in-house fabrication undertaken by Dowdens Pumping Industrial Workshops

Dowdens Pumping & Water Treatment's Brisbane branch has built a strong relationship with Sullivan Nicolaides Pathology (SNP) after more than 25 years of providing high purity water treatment systems / solutions for 22 of their Commercial Testing Pathology laboratories - from as far north as Cairns, down south to Coffs Harbour and everywhere in between. The majority of Dowdens Pumping & Water Treatment's high purity water treatment systems are used primarily in Sullivan Nicolaides blood testing machines. SNP was formed in 1956 when Dr John Sullivan started a small pathology practice to service local families in and around Brisbane. Dr Nick Nicolaides joined him 18 months later and since then, it has grown to one of the largest and most trusted pathology practices in Australia.

The PROBLEM:

Tap or 'town' water contains many substances that if left untreated, can react with the reagents used in controlled laboratory tests, causing positive or negative interference which leads to unreliable test results. Cations such as sodium, calcium, magnesium or iron; anions such as bicarbonate, chloride and sulfate; and other inorganic ions, are commonly found in tap water. A number of other contaminants - such as pyrogens, nucleases, alkaline phosphatase and endotoxins may be present. As they are not harmful for human consumption, they are not thoroughly regulated or tested in the course of South-East Queensland municipalities potable water treatment and distribution. These contaminants are detrimental to experimental / laboratory processes that require precision, high sensitivity and precise instrumental operation.

Our SOLUTION:

Water purification is highly dependent upon local (and even site-specific) variations in the make-up of the town / tap water quality, which can differ greatly from place to place. For this reason Dowdens Engineers have designed each and every SNP high purity water treatment system individually, with local and site specific feed water characteristics in mind. The most recent system was installed at SNP's Central Laboratory located in Bowen Hills, QLD.

After careful analysis of the town water being delivered directly to SNP's Bowen Hills Laboratory a turn-key 'looped' treatment system was designed, manufactured and incorporated into SNP's existing Building Maintenance System (BMS). The first stage of this looped system is pre-treatment of the town water via a set of Duplex Carbon Filters and Water Softeners. The water is then fed through Duplex Matten Reverse Osmosis systems and Duplex 10" Deionisers and then stored in four 1,000L loop tanks. This treated water then passes through a set of four Deioniser Polishing Systems which (via a pump) is recirculated into and around the labs as 18 MΩ/cm ultrapure water (UPW).

This 'looped' high purity water treatment system delivers 56,000L of 18 MΩ/cm UPW / day - providing not only the capacity required for SNP's entire Bowen Hills Central Laboratory, but also delivering sufficient redundancy so that during times of service / maintenance the lab and testing machines are never without sufficient UPW to remain operational.

Dowdens Pumping - Brisbane's design philosophy for this project was: Cost Effectiveness - Ease of Installation - Simple & Reliable Plant Operation - System Reliability & Reduction of Ongoing Maintenance Costs. The entire SNP high purity water treatment system was designed, manufactured, installed and commissioned on time and within budget.

Sullivan Nicolaides Pathology's Central Laboratory [Bowen Hills, QLD] - Key Components:

• Duplex Carbon Filters (with automatic Clack Valves)
• Duplex Water Softeners (with automatic Clack Valves)
• Duplex Matten 'L Series' Reverse Osmosis Systems

• Duplex 10" Deionisers
• 4x Deioniser Polishing 'Loop' Systems
• 4x 1,000L Treated Water 'Loop' Tanks

...

As an Australian owned company that began life in 1973 selling and servicing all manner of water treatment equipment, Dowdens has grown to employ over 160 staff situated across 4 branches in Mackay, Proserpine, Rockhampton and Brisbane permitting us to confidently service customers throughout Queensland, nationally and internationally. From project inception through to final commissioning - the team at Dowdens has the ability to deliver complete specialised long-term engineered solutions that are practical and innovative, ensuring our clients benefit from greater productivity and reduced equipment downtime.

With dedicated departments of industry trained engineers, draftsmen, project managers, sales staff and tradespeople including fitters, mechanics, polywelders, machinists, plumbers, electricians and boiler makers - Dowdens Pumping & Water Treatment offer an unmatched range of world-class engineered solutions for any type of water management project. We truly are Queensland's premier one-stop-shop for pumping and water treatment systems!

Anglo American's Australian Coal division engaged Dowdens Pumping & Water Treatment [Mackay] to deliver 8 specialised underground pumping PODs used for various dewatering applications at their Grosvenor Coal Mine, located 190km southwest of Mackay in Moranbah, Central Queensland.

The Grosvenor mine is a developing underground longwall operation that makes up part of Anglo American's plan to triple hard coking coal production at their Moranbah mine sites. Located next to their existing Moranbah North coal mine, Grosvenor is set to produce up to 5 million tonnes of hard coking coal per annum for export. The Grosvenor mine utilises a 10km overland conveyor to transport high-quality metallurgical coal to the Moranbah North Coal Handling & Preparation Plant.

Construction on Anglo American's $1.95 billion Grosvenor longwall project began back in January 2013, with the development celebrating a number of industry firsts including being the first underground coal mine in Queensland to use a tunnel boring machine to develop the drifts, or access tunnels, in coal mine development. Anglo American aimed to have the Grosvenor mine raise the bar for onsite system and production efficiency - making the supply of unique underground POD pumping systems a perfect match for Dowdens Pumping & Water Treatment's experienced Engineering Department.

Dowdens Engineering Department's comprehensive abilities have been on the radar of many Central Queensland/Bowen Basin mines for some time through direct contact and working with industry leading consulting engineering firms. Dowdens ability to expertly design/manufacture/install and commission unique equipment built to specific client needs, together with a history of successful installations over the past 15 years in the Bowen Basin has positioned the business as Queensland's premier pumping & water treatment organisation.

Underground Pumping PODs are used in mines as part of the site water management process. Mine water is collected from sumps and wet areas by Wilden air operated diaphragm pumps and delivered to PODs where water level sensors then activate the pump and transfer the collected mine water to a mains pump station, underground storage dam or directly out of the mine portal. Mine water is typically dirty with coal fine, rocks and dirt; therefore slurry pumps are needed to handle such water. PODs can be located in hazardous areas and can be fitted with Flame proof motors and motor controllers with PLC (Programmable Logic Controllers) and SCADA (Supervisory Control and Data Acquisition).

The Grosvenor mine site requirements meant each POD needed to have a 200kW power rating. With the site's physical constraints (i.e. the underground mined roof height and width, as well as the site lifting equipment for transporting) meant careful consideration was required for the overhung load whilst transporting this equipment. Capacity of a standard Dowdens POD is 4m3 with a 110kW motor, however with the larger flow rate required to and from the POD meant a 6m3 capacity working volume was needed. Bigger capacity and higher duty equated to a larger size motor and pump, more robust steel framework and additional accessibility for scheduled servicing.

Dowdens standard POD design incorporates a dirty water receiving area. This area, integral to the main hopper (container for collection of bulk material such as rock or soil), ensures particles that are too large for the pump to digest and transport are separated and manually removed periodically ensuring trouble free pumping.

Pumps selected by Dowdens for this harsh duty were Stalker 400SHD model with mechanical seals, seal lubrication and cooling. Motors selected were WEG brand Flameproof mine spec motors. The control for the pumps is a flameproof 200kW model with PLC and HMI (Human Machine Interface) screens. The controller starts and stops the pump, whilst also monitoring for faults and relaying important information to the mine surface via SCADA. Dowdens PODs built for the Grosvenor mine have the ability of easily interchanging the motors/pumps for differing duties. These will be identified as 200kW and 132kW cassettes. To accommodate this change the Main Control Unit (MCU) has the capacity to operate at either 200kW or 132kW with only slight changes to load controls.

The larger size and the flexibility to change the duty, together with Dowdens strategic POD site placement advice has enabled Anglo American less manoeuvring of the POD through development, saving costly underground labour and downtime. Without reliable pumping the mine's production slows/halts causing delays and safety issues which cost the mine many thousands of dollars each day. It was imperative the system worked and was extremely reliable. This project was delivered on time and within budget. Key project system components are listed below:

Unique features specific to the 8x Underground Dewatering Grosvenor PODs included:

• Fold out access platforms for operators to access the instruments and simplify servicing
• Direct fill points to prevent foaming of the mine water
• Overflow points for PODs operation on a steep slope
• Forklift access to both the pump and motor cassette

Key Project Features:

• PODs for this mine have the ability of interchangeable motors/pumps for differing duties
• PODs larger size, flexibility to change their duty together with Dowdens strategic POD placement advice enabled Anglo American to save on costly underground labour & pump downtime
• Safety & Design workshop hosted by Dowdens Mackay enabled project stakeholders to table all development & maintenance requirements ensuring seamless system delivery
• Project was delivered on time and within budget

Wesfarmers Resources, a significant Australian producer of metallurgical coal engaged Dowdens Pumping & Water Treatment's Industrial Workshop [Mackay branch] to deliver fast-turnaround servicing to a large selection of DAVEY Water Products Vertical Multistage In-Line Pumps [pictured below] that are used onsite at their Curragh Coal Mine, located 30km north of Blackwater in Central Queensland. This servicing project presented a number of challenges for the Dowdens Mackay Industrial Workshop, none more important than the tight timelines in which these repairs needed to be completed.

These DAVEY Vertical Multistage In-Line Pumps play a crucial role in the operation of the mine as they are used in various dewatering applications and also to boost supply of water to all of Curragh Coal Mine's various processing areas - including the vitally important Coal Handling & Preparation Plant (CHPP). Wesfarmers are supremely confident in having their pumps serviced by Dowdens Pumping, because after many years of working together they know Dowdens always aim to provide the sale / service of suitable pumps that maximise service life and minimise power usage and downtime. Improving levels of equipment utilisation whilst reducing planned / unplanned maintenance downtime increases the overall productivity of a coal mine.

Wesfarmers Curragh Coal Mine is an open-cut coal mine that provides metallurgical coal for export markets and supplies steaming coal to the Queensland Government's Stanwell Corporation under a long-term contract. Stanwell operate two major electricity generation assets, the Stanwell Power Station located in Central Queensland and the Tarong Power Station, located in the South Burnett, Southern Queensland. Wesfarmers Curragh Coal Mine has a well-established and geographically diverse customer portfolio with a number of long-standing relationships with world-leading steel-makers.

Like with any pump that arrives to Dowdens Pumping - Mackay's Industrial or Domestic Workshop, these Davey VM Vertical Multistage In-Line Pumps were serviced using Dowdens established workshop repair procedures. It was these established procedures and highly regarded workmanship that prompted Wesfarmers Resources to award Dowdens this important servicing contract. Dowdens Pumping - Mackay are so confident in our Workshop Servicing Capabilities we offer a "12 MONTH WORKMANSHIP GUARANTEE" for any service completed in-house - this is by-far the best guarantee available in or around Mackay, QLD. All pumps were successfully serviced and returned to site within Wesfarmers specified deadlines, meaning less downtime for Curragh Mine's related water infrastructure.

A very brief synopsis of this projects Key SERVICING Procedures are listed below:

• Set up pump on work bench & preform suite of electrical tests on motor
• Remove motor from the pump wet end
• Once seperated, run the pump motor independently of pump wet end to establish & gauge motors efficiency
• Submit detailed quote to customer clearly illustrating what is required to repair motor/pump
• Once quote has been accepted immediately begin to repair motor/pump components

• Dismantle motor and replace worn bearings
• Dismantle wet end of pump - clean, strip & asses all components
• Repair and reassemble both motor and pump wet end
• Connect unit to the Dowdens 'Pump Test Bench' & check all pump curves/electrical operation is 100%
• Undertake final inspection before preparing pump for transportation back to Curragh Coal Mine

...

Since opening in Mackay back in 1973, Dowdens has grown to employ over 160 staff situated across 4 branches in Mackay, Proserpine, Rockhampton and Brisbane permitting us to confidently service customers throughout Queensland, nationally and internationally. Dowdens services now cover all aspects of water engineering and fluid handling resource management for the residential, commercial / industrial, agricultural and mining sectors. From project inception through to final commissioning - the team at Dowdens has the ability to deliver complete specialised long-term engineered solutions that are practical and innovative, ensuring our clients benefit from greater productivity and reduced downtime.

With dedicated departments of industry trained engineers, draftsmen, project managers, sales staff and tradespeople including fitters, mechanics, polywelders, machinists, plumbers, electricians and boiler makers - Dowdens Pumping & Water Treatment offer an unmatched range of world-class engineering solutions for any type of water management project. We truly are Queensland's premier one-stop-shop for pumping and water treatment systems! CLICK HERE TO LODGE AN ONLINE PUMP SERVICE REQUEST, OR REQUEST AN OBLIGATION FREE QUOTE.

Arabon Seafoods employed Dowdens Pumping & Water Treatment [Mackay] to deliver a broad acre irrigation system watering their cattle feed pasture located in Bowen, QLD. Arabon Seafoods are a proud Queensland small business specializing in the sale and export of locally sourced live, chilled and frozen seafood.

Dowdens designed an efficient energy and water use irrigation system for Arabon Seafoods that utilises a Valley Two-Wheel-Linear Irrigator - the ideal irrigator for smallholder growers with limited access to electricity - together with a Nelson S3000 Spinner Sprinkler Package, Nelson 110VAC Shut-Off Valve, Valley Autopilot GPS Ready Control Panel and a Yanmar 10kVa 3-Phase Diesel Generator Set.

The Valley Two-Wheel-Linear Irrigator is a fairly standard machine in it's configuration but it's application to Arabon's cattle feed pasture is a departure from local practice. Most irrigation in this region is normally provided by low pressure boom type irrigators which are far less efficient in regards to energy and water consumption when compared to the Valley machine.

The system is required to pump water directly from onsite bores to the Valley Two-Wheel-Linear Irrigator watering 3.5 ha of cattle feed pasture. The irrigator's purpose is to provide water to a 'baleable' hay crop which is periodically onsold to local graziers as stock feed. The installation of a Valley linear irrigator has greatly reduced the number of irrigation runs that Arabon Seafoods has previously undertaken with their smaller boom type irrigator to water the same area of crop. Valley Two-Wheel-Linears deliver the ability to easily tow or swing the machine around to cover more acres.

Valley's 'easy to operate' Valley Autopilot GPS Ready Control Panel has enabled other Arabon Seafoods personnel to operate the irrigator which had always proved difficult in the past using a more dated irrigator. The GPS Ready Valley Autopilot Control Panel allows linears to automatically perform functions similar to a center pivot. The AutoPilot Linear measures the lateral position and direction of travel of the linear, allowing functions to be easily programmed to run automatically.

Dowdens Pumping & Water Treatment [Mackay] are the sole Valley Irrigation Master Dealers for the Mackay / Whitsunday region enabling the best possible pricing and unmatched product support for all of our customers.

Arabon Seafoods contacted Dowdens Mackay in mid-2015 and requested a site visit and quote. Within a week the Dowdens Ag Sales Team were onsite taking measurements and discussing options with the business owners. A system was designed to suit the area and application, and the quote was delivered. Arabon Seafoods was happy with the design and pricing and instructed Dowdens they would budget for this system in 2016.

Fast forward to mid-2016, working closely with the business owners Dowdens had successfully refined the quote and sourced all materials to be supplied. The purchase order arrived with Dowdens in late May 2016 - the irrigator was delivered to site on Friday 24th of June. The installation commenced Monday 27th of June and the machine was fully operational and commissioning was completed by Wednesday 29th of June.

Dowdens Pumping & Water Treatment's design philosophy for this project was: Cost Effectiveness - Current Best Practice - Ease of Installation - Simple & Effective System Operation - System Reliability & Delivering Reduced Ongoing Maintenance Requirements.

The entire project was overseen and managed by Brett Hayes from the Dowdens Pumping & Water Treatment [Mackay] Agricultural Sales Team.

Key Project Features:

• Valley Two-Wheel-Linear 'hose-drag' Irrigator with a 2.74m Overhang & 2 x 43.37m Lateral Spans
• Valley Autopilot GPS Ready Control Panel
• Nelson S3000 Spinner Sprinkler Package
• Nelson 110 VAC Shut-Off Valve
• 16.9" x 24" Tyre Package
• Yanmar 10kVa 3-Phase Diesel Generator Set
• 220m of 3½" Crusader Irrigator Hose